AVENO CLP 680

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO CLP 680
product title
0002-000302-020
0002-000302-060
0002-000302-200
0002-000302-999
Article number: 0002-000302
AVENO CLP 680 is produced on the basis of high quality mineral oils and proven additives. Its special combination of active ingredients achieves a stable high-pressure absorption capacity under impact loads. Due to the low pour point of AVENO CLP 680, the cold behavior of this product is excellent.
Application Note
AVENO CLP 680 has very good properties as a lubricant. AVENO CLP 680 can therefore be used in largely all industrial areas under stress and impact loads.
Characteristics
  • An excellent cold behavior
  • A low pour point
  • An excellent wear protection
  • Inhibits rust and corrosion
  • Prevents foam formation
  • Zinc free
Viscosity
ISO VG 680
Recommendation
Cincinnati Milacron, Clean Panel Coker, US Steel 224, US Steel S-200
Specification
AGMA 9005-D94, DIN 51517-3
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C676.0MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C39.0MM²/SDIN 51659-2:2017-02
Viscosity Index96DIN ISO 2909:2004-08
AppearanceYELLOWVISUELL
Density at 15°C902KG/M³DIN EN ISO 12185:1997-11
Pour Point-15°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.