AVENO Antifreeze SF A12+

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

  1. Aveno
  2. Range
  3. Antifreeze
  4. AVENO Antifreeze SF A12+
AVENO Antifreeze SF A12+
product title
0002-000941-005
0002-000941-015
0002-000941-020
0002-000941-060
0002-000941-200
0002-000941-999
Article number: 0002-000941
AVENO ANTIFREEZE SF A12+ is an eco-friendly 1.2- Ethanediol (monoethylene glycol) based silicate, borate, nitrite and phosphate-free coolant for cooling circuits in combustion engines which provides maintenance-free corrosion and frost protection. This product is formulated based on a proven inhibitor development with the organic additive technology OAT as an extended life coolant. The quality of an antifreeze is no longer just determined by the antifreeze effect (which automatically exists in an ethylene-glycol based product), but by the rust protection. That is why automakers subject antifreeze to lengthy corrosion and cavitation tests. AVENO ANTIFREEZE SF A12+ protects the cooling system from rust, frost, and in summer, from overheating.
Application Note
AVENO ANTIFREEZE SF A12+ with highly effective frost and rust protection. Usable in cooling systems with all-aluminium engines. Mix according to chart. Follow manufacturer's recommendations. Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection. Instructions: Clean cooling system, check for leaks, flush. AVENO ANTIFREEZE SF A12+ with clean water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.   AVENO ANTIFREEZE SF A12+  can also be used in geothermal probes and geothermal collectors as recommended list of LAWA (Federal / State Working Group on Water in Germany).   Mixing table (antifreeze/water): -12°C  25%  75% -20°C  35%  65% -37°C  50%  50%   Application information MAN: Mixing ban with type NF and type N. Silicone cooling water hoses according to MAN 334 type 3 (blue) may not be used in conjunction with coolants according to MAN 324 type SNF.
Characteristics
  • Excellent suitability for aluminium engines
  • Good reserve alkalinity
  • Optimum corrosion protection due to high quality corrosion additives for all metals and metal
  • alloys used in the cooling system, including aluminium.
  • Prevents deposits from forming and foaming in the cooling system
  • Can be mixed with other coolant antifreeze products
  • Compatible with the elastomers used in the coolers in car engines
  •  
Viscosity
Recommendation
Chrysler MS 9176, DTFR 29C110 (325.3), FORD ESD M97B49-A, Ford ESE M97B49-A, Ford WSS-M97B44-D, John Deere H 24 B1 und C1 , OPEL GM QL 130100, Porsche / VW/ AUDI/ Seat/ Skoda TL 774 F, Renault 41-01-00, VOLVO (Reg. N Deutz /mwn 0199-2091 2 Auflage)
Specification
ASTM D 1384, Long-life-G12+, STN 66 8910, TL 774- D, TL 774- F
Product Data Sheet
Download PDFDownload PDF
Request a price

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.